RELAY INSPECTION

PROCEDURE


  1. INSPECT IGNITION CONTROL RELAY


    1. A01MG1ME19

      Inspect the ignition control relay (IGCT1 No. 1).


      1. Measure the resistance according to the value(s) in the table below

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the ignition control relay (IGCT1 No. 1).