BATTERY VOLTAGE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL BATTERY VOLTAGE SENSOR

    CAUTION:

    Wear insulated gloves.


    1. A01MFY6C03
      *a Label(Purple or Ocher(Yellowish brown))
      *b End plate of the EV battery
      *c Hook of the EV battery

      Install the bolt and battery voltage sensor to the EV battery.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note


      • When installing, hang the 2 hooks of the battery voltage sensor on the end plate of the EV battery.

      • Check color of the label.

      If the battery voltage sensor is dropped or subjected to a strong impact, replace it with a new one.

    2. Install the wiring harness protector to the battery voltage sensor connector.

    3. Connect the battery voltage sensor connector.

    4. Engage the 2 claws to install the No. 1 wiring harness protector cover to the wiring harness protector.

  2. INSTALL NO. 2 EV BATTERY SHIELD PANEL

    CAUTION:

    Wear insulated gloves.


    1. Engage the 3 wire harness clamps.

    2. Install the No. 2 EV battery shield panel to the EV battery with the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    3. Connect the 2 connectors.

  3. INSTALL NO. 1 EV BATTERY COVER BRACKET LH


    1. A01MJFGE01

      Install the No. 1 EV battery cover bracket LH with the 2 nuts in the order shown in the illustration.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
    2. A01MHOEC02
      *a Button
      B006JEG Push

      Install the battery cover lock striker, then push the button to lock it.

      Note

      Secure the battery cover lock striker button by firmly pushing it in until a clicking sound is heard.

  4. INSTALL EV BATTERY COOLING DUCT

    Click here

  5. INSTALL INVERTER COVER

    Click here

  6. INSTALL FC STACK SERVICE PLUG GRIP

    Click here

  7. INSTALL SERVICE PLUG GRIP (for EV)

    Click here