ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

   
   

   1. Connect the Techstream to the DLC3.

   2. Turn the power switch on (IG).

   3. Enter the following menus: Powertrain / FC / Date Monitor / Accel Pedal Position No.1 Accel Pedal Position No.2

      
      Powertrain > EV > Data List

      Tester Display
      Accel Pedal Position No.1
      Accel Pedal Position No.2

      Result
      Tester Display Accel Pedal Pos #1 Accel Pedal Pos #2 Not depressed 10 to 22 %(0.5 to 1.1 V) 24 to 40 %(1.2 to 2.0 V) Fully depressed 52 to 90 %(2.6 to 4.5 V) 68 to 99 %(3.4 to 4.95 V) Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively Value changes progressively

      Tech Tips

      On the Techstream display, 5 V is displayed as 100%.