AUTOMATIC LIGHT CONTROL SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR


    1. Attach the claw to install the automatic light control sensor.

    2. Connect the connector.

  2. INSTALL UPPER INSTRUMENT PANEL

    Click here

  3. INSPECT AUTOMATIC LIGHT CONTROL SYSTEM

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. PERFORM DIAGNOSTIC SYSTEM CHECK

    for Type A:

    Click here

    for Type B:

    Click here

  6. CHECK SRS WARNING LIGHT

    for Type A:

    Click here

    for Type B:

    Click here