AUTOMATIC LIGHT CONTROL SENSOR REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   PRECAUTION

   CAUTION:
   

   Be sure to read Precaution thoroughly before servicing.

   for Type A:

   Click here

   for Type B:

   Click here

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

   Click here

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:
   

   
   

   • Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   • If the airbag deploys for any reason, it may cause a serious accident.

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. Click here

   REMOVE UPPER INSTRUMENT PANEL

   Click here

4. Click here

   REMOVE AUTOMATIC LIGHT CONTROL SENSOR

   
   
   1. 

      Disconnect the connector.

   2. 

      Detach the claw and remove the automatic light control sensor.