STOP LIGHT SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  2. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. B0027FZ

      Disconnect the connector.

    2. Turn the stop light switch assembly counterclockwise and remove it.

  3. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. B0028RAC01
      B00692L Protective Tape

      Using a screwdriver, detach the claw and remove the stop light switch mounting adjuster.

      Note

      The stop light switch mounting adjuster must not be reused.

      Tech Tips

      Tape the screwdriver tip before use.