HEADLIGHT LEVELING SWITCH INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT LEVELING SWITCH


    1. Check the illumination.


      1. A01LD3UC03
        *a

        Component without harness connected

        (Headlight Leveling Switch)

        Apply battery voltage to the connector and check the illumination conditions.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → G36-3 (ILL+)

        Battery negative (-) → G36-4 (ILL-)

        		 Illuminates

        If the result is not as specified, replace the headlight leveling switch.