Click here

FRONT BUMPER(for Resin Type Bumper) INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart.

Click here

Click here

PROCEDURE


  1. Click here

    INSTALL FRONT BUMPER SIDE SUPPORT LH (for Standard Body)


    1. B0068ZGC01
      B0069FO Install in this Direction

      Attach the claw to install the front bumper side support LH as shown in the illustration.

    2. Install the 2 clips and bolt.

  2. Click here

    INSTALL FRONT BUMPER SIDE SUPPORT RH (for Standard Body)

    Tip:

    Use the same procedure described for the LH side.

  3. Click here

    INSTALL FRONT BUMPER SIDE SUPPORT LH (for Wide Body)


    1. B00696YC01
      B0069FO Install in this Direction

      Attach the claw to install the front bumper side support LH as shown in the illustration.

    2. Install the 3 clips and bolt.

  4. Click here

    INSTALL FRONT BUMPER SIDE SUPPORT RH (for Wide Body)

    Tip:

    Use the same procedure described for the LH side.

  5. Click here

    INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. B0068SLC01
      B0069FO Install in this Direction

      Install the front bumper reinforcement sub-assembly with the 4 bolts.

      26 N*m 265 kgf*cm 19 ft.*lbf
  6. Click here

    INSTALL FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY (w/ Energy Absorber)


    1. B0068YAC02
      B0069FO Install in this Direction

      Attach the clip to install the front bumper energy absorber sub-assembly as shown in the illustration.

  7. Click here

    INSTALL FRONT BUMPER STONE DEFLECTOR LH


    1. B0068PSC01
      B0069FO Install in this Direction

      Attach the claw and guide to install the front bumper stone deflector LH as shown in the illustration.

  8. Click here

    INSTALL FRONT BUMPER STONE DEFLECTOR RH

    Tip:

    Use the same procedure described for the LH side.

  9. Click here

    INSTALL FRONT BUMPER NO. 2 SIDE SUPPORT LH (w/ Energy Absorber)


    1. B0068QH

      Install the front bumper side support LH with the 2 bolts.

  10. Click here

    INSTALL FRONT BUMPER NO. 2 SIDE SUPPORT RH (w/ Energy Absorber)

    Tip:

    Use the same procedure described for the LH side.

  11. Click here

    INSTALL RADIATOR SIDE DEFLECTOR LH


    1. B0068C6C01
      B0069FO Install in this Direction

      w/ Intercooler, w/ Energy Absorber:


      1. Attach the claw to install the radiator side deflector LH as shown in the illustration.

    2. B0068SBC01
      B0069FO Install in this Direction

      w/ Intercooler, w/o Energy Absorber:


      1. Attach the claw to install the radiator side deflector LH as shown in the illustration.

    3. B0068MOC01
      B0069FO Install in this Direction

      w/o Intercooler, w/ Energy Absorber:


      1. Attach the claw to install the radiator side deflector LH as shown in the illustration.

    4. B0068GLC01
      B0069FO Install in this Direction

      w/o Intercooler, w/o Energy Absorber:


      1. Attach the claw to install the radiator side deflector LH as shown in the illustration.

  12. Click here

    INSTALL RADIATOR SIDE DEFLECTOR RH

    Tip:

    Use the same procedure described for the LH side.

  13. Click here

    INSTALL FRONT BUMPER NO. 2 ENERGY ABSORBER (w/ Energy Absorber)


    1. B0068N6C01
      B0069FO Install in this Direction

      Install the front bumper No. 2 energy absorber with the 3 bolts as shown in the illustration.

  14. Click here

    INSTALL FRONT BUMPER COVER


    1. B006926C02
      *A for Standard Body
      *B for Wide Body
      B0069FO Install in this Direction

      Install the front bumper cover as shown in the illustration.

    2. w/ Pre-crash Safety System:


      1. Connect the connector.

    3. w/ Fog Light:


      1. Connect the connector.

    4. B006985C02
      B0069FO Install in this Direction

      for Standard Body:


      1. Attach the claw as shown in the illustration.

        Tip:

        Use the same procedure for the claw on the other side.

    5. B0068OUC01
      B0069FO Install in this Direction

      for Wide Body:


      1. Attach the claw as shown in the illustration.

        Tip:

        Use the same procedure for the claw on the other side.

    6. B0068Y0

      w/o Energy Absorber:


      1. Install the 3 screws.

    7. B0068XLC01
      B0068HS Screw
      B006964 Clip

      w/ Energy Absorber:


      1. Install the 3 screws and 2 clips.

    8. B0068Z8C01
      *a Bolt
      *b Screw

      Install the 2 screws and 2 bolts.

      for bolt
      12 N*m 122 kgf*cm 9 ft.*lbf

    9. Remove the protective tape.

    10. B0068YEC01
      *a Bolt
      *b Screw

      Install the 6 screws and 3 bolts.

    11. B0068M5C02
      *A for Standard Body
      *B for Wide Body
      *a CORRECT
      *b INCORRECT

      Install the pin hold clip.

      Tip:

      Use the same procedure for the pin hold clip on the other side.

    12. Install the clip.

      Tip:

      Use the same procedure for the clip on the other side.

  15. Click here

    INSTALL NO. 1 RADIATOR GRILLE RETAINER


    1. B0069F3

      Install the No. 1 radiator grille retainer with the 8 clips.

  16. Click here

    ADJUST FOG LIGHT AIMING

    Click here