FRONT BUMPER(for Resin Type Bumper) REASSEMBLY

PROCEDURE


  1. INSTALL FRONT BUMPER PAD

    Tech Tips


    • When installing the front bumper pad, heat the front bumper cover using a heat light.

    • Use the same procedure for all front bumper pads.

    Standard
    Item Temperature
    Front Bumper Cover 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B0068O1C23
    *a Heated Part
    *b Heat Light

    1. Clean the rear spoiler surface.


      1. Using a heat light, heat the front bumper cover surface.

      2. Remove the double-sided tape from the front bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B0068KG

      Install a new front bumper pad.


      1. Using a heat light, heat the front bumper cover.

      2. Remove the peeling paper from the face of the front bumper pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the front bumper pad as shown in the illustration.

        Tech Tips

        Press the front bumper pad firmly to install it.

  2. INSTALL FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)


    1. B0068JVC01
      B0069FO Install in this Direction

      Attach the claw to install the fog light mounting bracket LH as shown in the illustration.

  3. INSTALL FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL FOG LIGHT COVER LH (w/ Fog Light)


    1. B0068Q1C01
      B0069FO Install in this Direction

      Attach the claw to install the fog light cover LH as shown in the illustration.

  5. INSTALL FOG LIGHT COVER RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    1. B0068B5C01
      B0069FO Install in this Direction

      Attach the claw to install the front bumper hole cover LH as shown in the illustration.

  7. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  8. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  9. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL LOWER NO. 1 RADIATOR GRILLE


    1. B0068V3C01
      B0069FO Install in this Direction

      Attach the claw to install the 2 screws and lower No. 1 radiator grille as shown in the illustration.

  11. INSTALL HEADLIGHT CLEANER WASHER HOSE ASSEMBLY (w/ Headlight Cleaner System)

    Click here

  12. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  13. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  14. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER LH (w/ Headlight Cleaner System)

    Click here

  15. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  16. INSTALL RADIATOR GRILLE

    Click here