BACK-UP LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

    Click here

  2. REMOVE REAR COMBINATION LIGHT LENS LH (for Deck-less)

    Click here

  3. REMOVE REAR COMBINATION LIGHT LENS RH (for Deck-less)

    Click here

  4. REMOVE BACK UP LIGHT BULB


    1. A01LAMZC01
      *a Matchmark
      *b Unlock Position Mark
      B0069FO Counterclockwise

      w/ Deck:


      1. Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

      2. A01L8QBC01
        B0069FO Push in this Direction
        B0068NX Counterclockwise
        A01LA3O Remove in this Direction

        Push the back up light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.

    2. A01LAZPC01
      B0069FO Push in this Direction
      B0068NX Counterclockwise
      A01LA3O Remove in this Direction

      for Deck-less:

      Push the back up light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.

  5. INSTALL BACK UP LIGHT BULB


    1. A01LETUC02
      *a Protrusion
      B0068HS Cutout

      w/ Deck:


      1. Align the 2 protrusions on the back up light bulb with the 2 cutouts of the bulb socket and insert the bulb into the bulb socket.

      2. A01LEIFC01
        B0069FO Push in this Direction
        B0068NX Clockwise

        While pushing the back up light bulb, turn the bulb clockwise to install the bulb.

      3. A01LA55C01
        *a Matchmark
        *b Unlock Position Mark
        *c Lock Position Mark
        B0069FO Clockwise

        Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

    2. for Deck-less:


      1. A01LFOVC02
        *a Protrusion
        B0068HS Cutout

        Align the 2 protrusions on the back up light bulb with the 2 cutouts of the rear combination light body and insert the bulb to the rear combination light body.

      2. A01LFAPC01
        B0069FO Push in this Direction
        B0068NX Clockwise

        While pushing the back up light bulb, turn the bulb clockwise to install the bulb.

  6. CONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

    Click here

  7. INSTALL REAR COMBINATION LIGHT LENS LH (for Deck-less)

    Click here

  8. INSTALL REAR COMBINATION LIGHT LENS RH (for Deck-less)

    Click here