REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)


    1. Connect the connector.

    2. A01L995C01
      B0069FO Install in this Direction
      B00692L Protective Tape

      Attach the 2 clips to install the rear combination light assembly LH.

    3. A01LEGWC01
      B0068AS Place Hands Here
      B0069FO Push in this Direction

      Install the 2 bolts.

      Torque:
      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }

      Tech Tips

      Place your hands at the location shown in the illustration and while pushing the rear combination light assembly LH indicated by the arrow, tighten the 2 bolts.

    4. Close the tail gate.

  2. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH (for Deck-less)


    1. Install the rear combination light assembly LH with the 4 screws.

  3. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH (for Deck-less)


    1. Install the rear combination light assembly RH with the 4 screws.

    2. Connect the connector.

  4. INSTALL REAR COMBINATION LIGHT BRACKET LH (for Deck-less, LH Side)


    1. Install the rear combination light bracket LH with bolt.

      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

    2. Connect the connector.