CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
REMOVE REAR COMBINATION LIGHT LENS LH (for Deck-less)
Remove the rear combination light lens LH from the rear combination light body.
REMOVE TAIL AND STOP LIGHT BULB
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Counterclockwise |
w/ Deck:
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.
|
Push in this Direction |
|
Counterclockwise |
|
Remove in this Direction |
Push the tail and stop light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
|
Push in this Direction |
|
Counterclockwise |
|
Remove in this Direction |
for Deck-less:
Push the tail and stop light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.
REMOVE REAR TURN SIGNAL LIGHT BULB
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Counterclockwise |
w/ Deck:
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.
|
Push in this Direction |
|
Counterclockwise |
|
Remove in this Direction |
Push the rear turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
|
Push in this Direction |
|
Counterclockwise |
|
Remove in this Direction |
for Deck-less:
Push the rear turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.
REMOVE BACK UP LIGHT BULB
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Counterclockwise |
w/ Deck:
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.
|
Push in this Direction |
|
Counterclockwise |
|
Remove in this Direction |
Push the back up light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
|
Push in this Direction |
|
Counterclockwise |
|
Remove in this Direction |
for Deck-less:
Push the back up light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.
REMOVE NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Counterclockwise |
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.
|
Push in this Direction |
|
Counterclockwise |
|
Remove in this Direction |
Push the No. 1 rear fog light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH (w/ Deck)
Detach the connector and remove the rear combination light socket and wire sub-assembly LH.
REMOVE REAR COMBINATION LIGHT LENS GASKET LH (for Deck-less)
Remove the rear combination light lens gasket LH from the rear combination light body.
Note
If the rear combination light lens gasket LH has been damaged, replace it with a new one.