SIDE TURN SIGNAL LIGHT ASSEMBLY(for Outer Rear View Mirror) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR LH

    Click here

  2. REMOVE OUTER MIRROR COVER LH

    Click here

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. A01LF7L

      Remove the 2 screws.

    2. A01L87RC01
      B00692L Protective Tape

      Using a screwdriver, detach the claw.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01LAXCC01
      B0069FO Remove in this Direction

      Detach the claw and remove the under cover together with the side turn signal light assembly LH.

    4. A01L820

      Detach the wire harness clamp and disconnect the connector.