FRONT TURN SIGNAL LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   REMOVE FRONT TURN SIGNAL LIGHT BULB (for Halogen Headlight)

   
   
   1. 

      *a	Matchmark
      *b	Unlock Position Mark
      	Counterclockwise

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

   2. 

      	Push
      	Counterclockwise
      	Remove in this Direction

      Push the front turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the front turn signal light socket.

2. Click here

   REMOVE FRONT TURN SIGNAL LIGHT BULB (for LED Headlight)

   
   
   1. 

      Remove the 2 clips.

   2. 

      *a	90°
      	Turn in this Direction

      Turn the pin hold clip 90° and then pull the pin hold clip to remove it.

   3. 

      Remove the 3 screws and 4 clips and disconnect the front fender splash shield sub-assembly LH.

   4. 

      *a	Matchmark
      *b	Unlock Position Mark
      	Counterclockwise

      Turn the front turn signal light socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the front turn signal light socket.

   5. 

      	Push
      	Counterclockwise
      	Remove in this Direction

      Push the front turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the front turn signal light socket.

3. Click here

   INSTALL FRONT TURN SIGNAL LIGHT BULB (for Halogen Headlight)

   
   
   1. 

      *a	Protrusion
      	Cutout

      Align the 2 protrusions on the front turn signal light bulb with the 2 cutouts of the front turn signal light socket and insert the bulb.

   2. 

      	Push in this Direction
      	Clockwise

      While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.

   3. 

      *a	Matchmark
      *b	Unlock Position Mark
      *c	Lock Position Mark
      	Clockwise

      Align the matchmark of the front turn signal light socket with the unlock position mark, and then rotate the front turn signal light socket clockwise until the lock position mark to connect the front turn signal light socket.

4. Click here

   INSTALL FRONT TURN SIGNAL LIGHT BULB (for LED Headlight)

   
   
   1. 

      *a	Protrusion
      	Cutout

      Align the 2 protrusion on the front turn signal light bulb with the 2 cutouts of the front turn signal light socket and insert the bulb.

   2. 

      	Push in this Direction
      	Clockwise

      While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.

   3. 

      *a	Matchmark
      *b	Unlock Position Mark
      *c	Lock Position Mark
      	Clockwise

      Align the matchmark of the front turn signal light socket with the unlock position mark, and then rotate the front turn signal light socket clockwise until the lock position mark to connect the front turn signal light socket.

   4. Return the front fender splash shield sub-assembly LH to its original position and install the 3 screws and 4 clips.

   5. 

      *a	90°
      	Turn in this Direction

      Insert and turn the pin hold clip 90° to install it.

   6. Install the 2 clips.