HEADLIGHT DIMMER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. B0024ACC01
      B0068O0 Stopper
      B00692L Cutout

      Align the 2 stoppers of the headlight dimmer switch assembly with the 2 cutouts of the steering column and set the headlight dimmer switch assembly.

    2. Attach the claw to install the headlight dimmer switch assembly.

    3. Connect the connector.

  2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

    Click here

  3. INSTALL SPIRAL CABLE SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. PERFORM DIAGNOSTIC SYSTEM CHECK

    for Type A:

    Click here

    for Type B:

    Click here

  6. CHECK SRS WARNING LIGHT

    for Type A:

    Click here

    for Type B:

    Click here