HEADLIGHT ASSEMBLY(for LED Headlight) REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING

   
   

   1. Install a new headlight leveling motor base packing to the headlight unit.

2. Click here

   INSTALL HEADLIGHT LEVELING MOTOR LH

   
   

   1. Set the tip of the aiming screw of the headlight leveling motor LH onto the headlight unit.

   2. Tighten the aiming screw of the headlight leveling motor LH the same number of rotations recorded when removing it to connect the headlight leveling motor LH.

   3. 

      *a	Aiming Screw
      	Tighten in this Direction
      	Clockwise

      Insert the headlight leveling motor LH.

   4. Turn the headlight leveling motor LH clockwise to install it.

      Tip:

      For the headlight assembly RH, turn the headlight leveling motor RH counterclockwise to install it.

   5. Tighten the aiming screw 20 rotations.

3. Click here

   INSTALL FRONT TURN SIGNAL LIGHT BULB

   
   
   1. 

      *a	Protrusion
      	Cutout

      Align the 2 protrusions on the front turn signal light bulb with the 2 cutouts of the front turn signal light socket and insert the bulb.

   2. 

      	Push in this Direction
      	Clockwise

      While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.

4. *a Matchmark *b Unlock Position Mark *c Lock Position Mark Clockwise
   Click here

   INSTALL FRONT TURN SIGNAL LIGHT SOCKET

   
   

   1. Align the matchmark of the front turn signal light socket with the unlock position mark of the headlight unit, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket.

5. Click here

   INSTALL NO. 1 HEADLIGHT BULB

   
   

   1. Insert the No. 1 headlight bulb into the headlight unit.

      Note:

      Do not touch the glass part of the No. 1 headlight bulb.

   2. 

      Clockwise

      Turn the No. 1 headlight bulb clockwise until the bulb stops to install it.