HEADLIGHT ASSEMBLY(for Halogen Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY LH


    1. B006954C01
      *A w/ Headlight Leveling

      Connect each connector and 2 wire harness clamps.

    2. B0068VCC01
      B0068HS Connect the Seat of the Screw.

      Push the headlight assembly LH backward and connect the bracket to the seat of the screw.

      Note

      Be careful not to break the bracket.

    3. Install the 3 screws and bolt.

  2. INSTALL FRONT BUMPER COVER (for Steel Type Bumper)

    Click here

  3. INSTALL NO. 1 RADIATOR GRILLE RETAINER (for Steel Type Bumper)

    Click here

  4. INSTALL FRONT BUMPER COVER (for Resin Type Bumper)

    Click here

  5. ADJUST HEADLIGHT AIMING

    Click here

  6. ADJUST FOG LIGHT AIMING (w/ Fog Light)

    Click here