HEADLIGHT ASSEMBLY(for Halogen Headlight) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (w/ Headlight Leveling)


    1. Install a new headlight leveling motor base packing.

  2. INSTALL HEADLIGHT LEVELING MOTOR LH (w/ Headlight Leveling)


    1. Set the tip of the aiming screw of the headlight leveling motor LH onto the headlight unit.

    2. Tighten the aiming screw of the headlight leveling motor LH the same number of rotations recorded when removing it to connect the headlight leveling motor LH.

    3. A01L9HJC01
      *a Aiming Screw
      B0069FO Tighten in this Direction
      B0068NX Clockwise

      Insert the headlight leveling motor LH.

    4. Turn the headlight leveling motor LH clockwise to install it.

      Tech Tips

      For the headlight assembly RH, turn the headlight leveling motor RH counterclockwise to install it.

    5. Tighten the aiming screw 20 rotations.

  3. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. A01L85JC01
      *a Protrusion
      B0068HS Cutout

      Align the 2 protrusions on the front turn signal light bulb with the 2 cutouts of the front turn signal light socket and insert the bulb.

    2. A01LFAHC01
      B0069FO Push in this Direction
      B0068NX Clockwise

      While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.

  4. INSTALL FRONT TURN SIGNAL LIGHT SOCKET

    A01L8BJC01
    *a Matchmark
    *b Unlock Position Mark
    *c Lock Position Mark
    B0069FO Clockwise

    1. Align the matchmark of the front turn signal light socket with the unlock position mark of the headlight unit, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket.

  5. INSTALL CLEARANCE LIGHT BULB


    1. Install the clearance light bulb to the clearance light socket.

  6. INSTALL CLEARANCE LIGHT SOCKET

    A01LFRHC01
    *a Matchmark
    *b Unlock Position Mark
    *c Lock Position Mark
    B0069FO Clockwise

    1. Align the matchmark of the clearance light socket with the unlock position mark of the headlight unit, and then rotate the clearance light socket clockwise until the lock position mark to install the clearance light socket.

  7. INSTALL NO. 1 HEADLIGHT BULB


    1. A01L9HT

      Align the shaded area of the No. 1 headlight bulb shown in the illustration with the shaded area of the headlight unit and insert the No. 1 headlight bulb into the headlight unit.

      Note

      Do not touch the glass part of the No. 1 headlight bulb.

    2. A01LG5LC01
      B0069FO Lock in this Direction

      Lock the set spring by moving it in the direction indicated by the arrow in the illustration.

  8. INSTALL HEADLIGHT SOCKET COVER


    1. Install the headlight socket cover to the headlight unit.