HEADLIGHT ASSEMBLY(for Halogen Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 1 RADIATOR GRILLE RETAINER (for Steel Type Bumper)

    Click here

  2. REMOVE FRONT BUMPER COVER (for Steel Type Bumper)

    Click here

  3. REMOVE FRONT BUMPER COVER (for Resin Type Bumper)

    Click here

  4. REMOVE HEADLIGHT ASSEMBLY LH

    B0068B9C01
    B00692L Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Remove the bolt and 3 screws.

    3. B0068HMC01
      B0068AS Place Hands Here

      Place your hands at the location shown in the illustration, and disconnect the bracket from the seat of the screw.

      Note

      Be careful not to break the bracket.

    4. Pull the headlight assembly LH forward to remove it.

    5. B006954C01
      *A w/ Headlight Leveling

      Disconnect each connector and 2 wire harness clamps.