WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for LHD)


    1. for Europe:


      1. With the engine switch turned to on (IG), check the position that the washer fluid hits the windshield.

        OK
        Washer fluid hits the windshield in the areas shown in the illustration.
        A01SBJBC01
        *a Upper Limit *b Standard
        *c Lower Limit - -
        Standard
        Area Measurement Area Measurement
        A 165 mm (6.4960 in.) B 208 mm (8.1890 in.)
        C 133 mm (5.2362 in.) D 245 mm (9.6457 in.)

        Note

        If the result is not as specified, replace the washer nozzle sub-assembly.

    2. except Europe:


      1. With the engine switch turned to on (IG), check the position that the washer fluid hits the windshield.

        OK
        Washer fluid hits the windshield in the areas shown in the illustration.
        A01SEZQC01
        *a Upper Limit *b Standard
        *c Lower Limit - -
        Standard
        Area Measurement Area Measurement
        A 184 mm (7.2441 in.) B 215 mm (8.4646 in.)
        C 115 mm (4.5276 in.) D 197 mm (7.7559 in.)

        Note

        If the result is not as specified, replace the washer nozzle sub-assembly.

  2. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for RHD)


    1. for Europe:


      1. With the engine switch turned to on (IG), check the position that the washer fluid hits the windshield.

        OK
        Washer fluid hits the windshield in the areas shown in the illustration.
        A01SCH4C01
        *a Upper Limit *b Standard
        *c Lower Limit - -
        Standard
        Area Measurement Area Measurement
        A 165 mm (6.4960 in.) B 208 mm (8.1890 in.)
        C 133 mm (5.2362 in.) D 245 mm (9.6457 in.)

        Note

        If the result is not as specified, replace the washer nozzle sub-assembly.

    2. except Europe:


      1. With the engine switch turned to on (IG), check the position that the washer fluid hits the windshield.

        A01SB0DC01
        *a Upper Limit *b Standard
        *c Lower Limit - -
        OK
        Washer fluid hits the windshield in the areas shown in the illustration.
        Standard
        Area Measurement Area Measurement
        A 184 mm (7.2441 in.) B 215 mm (8.4646 in.)
        C 115 mm (4.5276 in.) D 197 mm (7.7559 in.)

        Note

        If the result is not as specified, replace the washer nozzle sub-assembly.