WASHER MOTOR(for Resin Type Bumper) REMOVAL

PROCEDURE


  1. DRAIN WASHER FLUID


    1. A01LCGPC01
      B0068HS Turn in this Direction

      Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.

    2. for 2WD Model:


      1. A01LFQTC01
        B0068HS Screw
        B006964 Clip
        B0069FO Slide in this Direction

        Remove the 3 screws.

      2. Remove the 9 clips.

      3. Slide the front fender liner LH toward the rear of the vehicle and down to create a clearance as shown in the illustration.

    3. for 4WD Model, for Prerunner Model:


      1. A01LAWXC01
        B0068HS Screw
        B006964 Clip
        B0069FO Slide in this Direction

        Remove the 3 screws.

      2. Remove the 11 clips.

      3. Slide the front fender liner LH toward the rear of the vehicle and down to create a clearance as shown in the illustration.

    4. for 2.5 L Washer Jar:


      1. A01LEE3

        Disconnect the washer hose and drain the washer fluid.

        Note

        Prepare a container before performing the procedure.

    5. for 4.5 L Washer Jar:


      1. A01L8RA

        Disconnect the washer hose and drain the washer fluid.

        Note

        Prepare a container before performing the procedure.

  2. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. for 2.5 L Washer Jar:


      1. A01LEDPC01
        B0069FO Remove in this Direction

        Disconnect the connector.

      2. Pull as shown in the illustration to remove the windshield washer motor and pump assembly.

    2. for 4.5 L Washer Jar:


      1. A01L9ETC01
        B0069FO Remove in this Direction

        Disconnect the connector.

      2. Pull as shown in the illustration to remove the windshield washer motor and pump assembly.

  3. REMOVE WASHER INLET SUB-ASSEMBLY


    1. A01LFQLC01
      B0069FO Remove in this Direction

      Detach the claw and guide and remove the washer inlet sub-assembly.

  4. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    1. for 2.5 L Washer Jar:


      1. A01L9K1

        Detach the clamp.

      2. Remove the 3 bolts and windshield washer jar assembly.

    2. for 4.5 L Washer Jar, w/ Headlight Cleaner System:


      1. A01LFXWC01
        *a Tab
        B0068HS Push
        B0069FO Disconnect in this Direction

        Push the tab to detach the claw and disconnect the headlight cleaner hose as shown in the illustration.

      2. A01LEP0C01
        B0068HS Connector
        B006964 Bolt

        Disconnect the 3 connectors.

      3. Detach the clamp.

      4. Remove the 3 bolts and windshield washer jar assembly.

      5. A01LG64C01
        B0069FO Remove in this Direction

        Remove the level warning switch assembly.

      6. A01L912C01
        B0069FO Remove in this Direction

        Remove the headlight cleaner motor and pump assembly.

      7. A01L9XEC01
        B0069FO Remove in this Direction

        Detach the claw and remove the headlight cleaner control relay.

    3. for 4.5 L Washer Jar, w/o Headlight Cleaner System:


      1. A01LE3EC01
        B0068HS Connector
        B006964 Bolt

        Disconnect the connector.

      2. Detach the clamp.

      3. Remove the 3 bolts and windshield washer jar assembly.

      4. A01LG64C01
        B0069FO Remove in this Direction

        Remove the level warning switch assembly.