WASHER MOTOR(for Resin Type Bumper) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

    Tech Tips

    This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


    1. With the windshield washer motor and pump assembly installed to the windshield washer jar assembly, pour windshield washer fluid into the windshield washer jar assembly.

    2. A01LFG0C01
      *a Component without harness connected (Windshield Washer Motor and Pump Assembly)

      Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 2

      		 Washer fluid is pumped

      If the result is not as specified, replace the windshield washer motor and pump assembly.