HEADLIGHT CLEANER CONTROL RELAY REMOVAL

PROCEDURE


  1. REMOVE HEADLIGHT CLEANER CONTROL RELAY


    1. A01LCGPC01
      B0068HS Turn in this Direction

      Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.

    2. A01LAWXC01
      B0068HS Screw
      B006964 Clip
      B0069FO Slide in this Direction

      Remove the 3 screws.

    3. Remove the 11 clips.

    4. Slide the front fender liner LH toward the rear of the vehicle and down to create a clearance as shown in the illustration.

    5. A01LFOIC01
      B0069FO Remove in this Direction

      Disconnect the connector.

    6. Detach the claw and remove the headlight cleaner control relay as shown in the illustration.