HEADLIGHT CLEANER CONTROL RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT CLEANER CONTROL RELAY


    1. A01LBQ3C02
      *a

      Component without harness connected

      (Headlight Cleaner Control Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      6 (PB) - 4 (E) Battery voltage applied between terminals 3 (IG) and 2 (H) Below 1 Ω
      Battery voltage not applied between terminals 3 (IG) and 2 (H) 10 kΩ or higher

      If the result is not as specified, replace the headlight cleaner control relay.