PROCEDURE
INSTALL FUEL FILLER OPENING LID LOCK RETAINER
|
Install in this Direction |
Install a new fuel filler opening lid lock retainer as shown in the illustration.
INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for LHD)
|
Install in this Direction |
Attach the claw to install the fuel lid lock control cable sub-assembly to the fuel filler opening lid lock retainer as shown in the illustration.
Attach the fuel lid lock control cable sub-assembly to each clamp as shown in the illustration.
Install the grommet to the vehicle body.
| *1 | Fuel Lid Lock Control Cable Sub-assembly | *2 | Grommet |
INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for RHD)
|
Install in this Direction |
Attach the claw to install the fuel lid lock control cable sub-assembly to the fuel filler opening lid lock retainer as shown in the illustration.
Attach the fuel lid lock control cable sub-assembly to each clamp as shown in the illustration.
Install the grommet to the vehicle body.
| *A | for 4WD and Pre-Runner without VSC | - | - |
| *1 | Fuel Lid Lock Control Cable Sub-assembly | *2 | Grommet |
INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for LHD)
INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for RHD)
INSTALL REAR WHEEL HOUSE LINER LH
Install the rear wheel house liner.
INSTALL FRONT FLOOR CARPET ASSEMBLY
Install the floor carpet.
INSTALL LUGGAGE COMPARTMENT SIDE COVER LH
INSTALL COWL SIDE TRIM BOARD LH (for LHD)
INSTALL COWL SIDE TRIM BOARD RH (for RHD)
INSTALL FRONT DOOR SCUFF PLATE LH
INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)
INSTALL LOWER QUARTER TRIM PANEL LH
INSTALL BACK PANEL TRIM
INSTALL CONSOLE BOX ASSEMBLY (for RHD, w/ Console Box Lid)
INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (for RHD, w/ Rear Console Box)
INSTALL REAR SEAT CUSHION ASSEMBLY (for RHD)
INSTALL FRONT SEAT ASSEMBLY RH (for RHD)
for Manual Seat:
for Power Seat:
INSTALL FRONT SEAT ASSEMBLY LH
for Manual Seat:
Tech Tips
Use the same procedure described for the RH side.
for Power Seat:
Tech Tips
Use the same procedure described for the RH side.