HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) INSTALLATION

PROCEDURE

1. Click here

   INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

   
   
   1. 

      *1

      String

      Tie the string that was passed through the engine compartment to the end of the hood lock control cable assembly as shown in the illustration.

      Tip:

      Use a length of string long enough to pass through the engine compartment.

   2. Pass the hood lock control cable assembly through the vehicle body, and then attach the grommet and each clamp.

   3. 

      *1	Hood Lock Control Cable Assembly	*2	Grommet
      *3	Clamp	-	-

      Untie the string from the hood lock control cable assembly.

2. Click here

   INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   
   
   1. 

      Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.

   2. 

      Attach the claw to install the hood lock control lever sub-assembly.

3. Click here

   INSTALL HOOD LOCK ASSEMBLY

   
   
   1. 

      Apply MP grease to the sliding parts of the hood lock assembly.

   2. Connect the hood lock control cable assembly to the hood lock assembly.

   3. 

      Install the hood lock assembly with the 3 bolts.

      11 N*m

      112 kgf*cm

      8 ft.*lbf

4. Click here

   INSTALL NO. 1 RADIATOR GRILLE RETAINER

   Click here