HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 RADIATOR GRILLE RETAINER

    Click here

  2. REMOVE HOOD LOCK ASSEMBLY


    1. B0068TB

      Remove the 3 bolts and hood lock assembly.

    2. B00689Z

      Detach the clamp, disconnect the hood lock control cable assembly and remove the hood lock assembly.

  3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B0068XV

      Detach the claw.

    2. B00695D

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. B0068LCC11
      *1 String

      Tie a string to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Detach each clamp and the grommet, and then pull out the hood lock control cable from the vehicle body.

    3. Untie the string from the hood lock control cable assembly.

      B0068KKC01
      *1 Hood Lock Control Cable Assembly *2 Grommet
      *3 Clamp - -