HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas A to D are within the standard ranges.

      A01LBGLN01
      Standard
      Area Specified Condition Area Specified Condition
      A 4.0 to 7.0 mm (0.157 to 0.276 in.) B -0.9 to 2.1 mm (-0.035 to 0.083 in.)
      C 3.5 to 6.5 mm (0.138 to 0.256 in.) D -1.0 to 2.0 mm (-0.039 to 0.079 in.)