WINDOW DEFOGGER WIRE REPAIR

PROCEDURE


  1. REPAIR BACK WINDOW GLASS

    A01L9JOC04
    *1 Repair Point
    *2 Broken Wire
    *3 Masking Tape

    1. Clean the broken wire tips with grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. Thoroughly mix the repair agent.

    4. A01L9JGC03
      *1 Repair Point
      *2 Fine Tip Brush

      Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not allow electricity to flow in the defogger wire for at least 24 hours.