POWER WINDOW REGULATOR MOTOR(for Front Door) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

   
   

   1. Apply MP grease to the sliding and rotating areas of the regulator motor.

   2. 

      Using a T25 "TORX" socket wrench, install the power window regulator motor assembly LH with the 3 screws.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Tech Tips

      A new power window regulator motor assembly LH uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.

   3. 

      for Front Passenger Side, w/o Jam Protection Function:

      Using a T25 "TORX" socket wrench, install the power window regulator motor assembly RH with the 3 screws.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Tech Tips

      A new power window regulator motor assembly RH uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.

2. INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH

   Click here

3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

   Click here

4. INSTALL FRONT DOOR GLASS RUN LH

   Click here

5. INSTALL FRONT DOOR SERVICE HOLE COVER LH

   Click here

6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

   Click here

7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

   Click here

8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

   Click here

9. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

   Click here

10. INSTALL FRONT ARMREST ASSEMBLY LH

    Click here

11. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH

    Click here

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

13. INITIALIZE POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function)

    Click here