ROOF HEADLINING(for Smart Cab) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL LUGGAGE COMPARTMENT SIDE COVER LH


    1. B0025UHC01
      B0069FO Install in this Direction

      Attach the claw to install the luggage compartment side cover LH as shown in the illustration.

    2. B002753C01
      *1 Front Door Opening Trim Weatherstrip LH

      Connect the front door opening trim weatherstrip LH in the range shown in the illustration.

  2. INSTALL LUGGAGE COMPARTMENT SIDE COVER RH


    1. B0026M0C01
      B0069FO Install in this Direction

      Attach the claw to install the luggage compartment side cover RH as shown in the illustration.

    2. B00271PC01
      *1 Front Door Opening Trim Weatherstrip RH

      Connect the front door opening trim weatherstrip RH in the range shown in the illustration.

  3. INSTALL FRONT DOOR SCUFF PLATE LH


    1. B0025NWC01
      B0069FO Install in this Direction

      Attach the clip and claw to install the front door scuff plate LH as shown in the illustration.

  4. INSTALL FRONT DOOR SCUFF PLATE RH


    1. B0028DTC01
      B0069FO Install in this Direction

      Attach the clip and claw to install the front door scuff plate RH as shown in the illustration.

  5. INSTALL REAR NO. 2 SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)


    1. B002870

      Attach the claw to install the rear No. 2 side rail spacer LH.

  6. INSTALL REAR NO. 2 SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)


    1. B0026XI

      Attach the claw to install the rear No. 2 side rail spacer RH.

  7. INSTALL REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)


    1. B0024XZ

      Attach the claw to install the rear side rail spacer LH.

  8. INSTALL REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)


    1. B0025F1

      Attach the claw to install the rear side rail spacer RH.

  9. INSTALL FRONT SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)


    1. B00260K

      Attach the claw to install the front side rail spacer LH.

  10. INSTALL FRONT SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)


    1. B0024KW

      Attach the claw to install the front side rail spacer RH.

  11. INSTALL ROOF HEADLINING ASSEMBLY


    1. B0028JZC01
      B0069FO Movement Direction

      Insert the roof headlining assembly into the cabin from the front door.

      Note


      • Check that the corners of the roof headlining assembly are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

      • Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.

      • Do not damage the roof headlining assembly or vehicle interior.

    2. B0025Y0

      Install the visor holder as shown in the illustration.

    3. B0027JRC01
      B0069FO Install in this Direction

      Attach the claw to install the visor holder as shown in the illustration.

      Tech Tips

      Use the same procedure for both visor holders.

    4. B00286K

      Install the roof headlining assembly with the 3 clips.

    5. B0026MPC01
      *1 Front Door Opening Trim Weatherstrip LH

      Connect the front door opening trim weatherstrip LH in the range shown in the illustration.

    6. B0028X9C01
      *1 Front Door Opening Trim Weatherstrip RH

      Connect the front door opening trim weatherstrip RH in the range shown in the illustration.

    7. w/ Pre-collision System:


      1. B0025PK

        w/ Camera Heater:

        Connect the 2 connectors.

      2. B00263F

        w/o Camera Heater:

        Connect the connector.

    8. w/o Pre-collision System:


      1. B0027M0

        Connect the connector and attach the clamp to the front pillar LH.

    9. w/ Pre-collision System:


      1. B0026T9

        Connect the connector and attach the clamp to the front pillar LH.

  12. INSTALL ROOF HEADLINING SERVICE HOLE COVER (w/o Assist Grip)


    1. B00278A

      Install the 2 roof headlining service hole covers.

  13. INSTALL FRONT ROOF SIDE RAIL GARNISH LH


    1. B0025E0C01
      B0069FO Install in this Direction

      Attach the clip to install the front roof side rail garnish LH as shown in the illustration.

  14. INSTALL FRONT ROOF SIDE RAIL GARNISH RH


    1. B00275MC01
      B0069FO Install in this Direction

      Attach the clip to install the front roof side rail garnish RH as shown in the illustration.

  15. INSTALL ASSIST GRIP SUB-ASSEMBLY

    Tech Tips

    w/ Assist Grip:

    Use the same procedure for both assist grip sub-assemblies.


    1. B0026VD

      Install the assist grip sub-assembly with the 2 bolts.

    2. B0025IN

      Attach the claw to close the assist grip cover.

  16. INSTALL VISOR ASSEMBLY LH


    1. B0027W6

      Install the visor assembly LH with the 2 screws.

    2. Connect the visor assembly LH to the visor holder.

  17. INSTALL VISOR ASSEMBLY RH


    1. B0025D8

      Install the visor assembly RH with the 2 screws.

    2. Connect the visor assembly RH to the visor holder.

  18. INSTALL VISOR BRACKET COVER LH


    1. B0025OEC01
      B0069FO Install in this Direction

      Attach the claw to install the visor bracket cover LH as shown in the illustration.

  19. INSTALL VISOR BRACKET COVER RH


    1. B00250ZC01
      B0069FO Install in this Direction

      Attach the claw to install the visor bracket cover RH as shown in the illustration.

  20. INSTALL NO. 1 ROOM LIGHT ASSEMBLY

    Click here

  21. INSTALL MAP LIGHT ASSEMBLY

    Click here

  22. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)

    Click here

  23. INSTALL QUARTER INSIDE TRIM BOARD LH


    1. B0025APC01
      B0069FO Install in this Direction

      Attach the clip to install the quarter inside trim board LH as shown in the illustration.

    2. B00278VC01
      *1 Front Door Opening Trim Weatherstrip LH

      Connect the front door opening trim weatherstrip LH in the range shown in the illustration.

    3. B0026P3

      for RHD:


      1. Connect the rear seat outer belt assembly LH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  24. INSTALL QUARTER INSIDE TRIM BOARD RH


    1. B0026V5C01
      B0069FO Install in this Direction

      Attach the clip to install the quarter inside trim board RH as shown in the illustration.

    2. B0024BOC01
      *1 Front Door Opening Trim Weatherstrip RH

      Connect the front door opening trim weatherstrip RH in the range shown in the illustration.

    3. B0024ED

      for RHD:


      1. Connect the rear seat outer belt assembly RH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  25. INSTALL SEAT BELT ANCHOR COVER CAP (for RHD)

    Tech Tips

    Use the same procedure for both seat belt anchor cover caps.


    1. B0024RGC01
      B0069FO Install in this Direction

      Attach the claw to install the seat belt anchor cover cap as shown in the illustration.

  26. INSTALL LOWER QUARTER TRIM PANEL LH


    1. B002934C01
      B0069FO Install in this Direction

      Attach the clip and claw to install the lower quarter trim panel LH as shown in the illustration.

    2. B0024F6C01
      *1 Front Door Opening Trim Weatherstrip LH

      Connect the front door opening trim weatherstrip LH in the range shown in the illustration.

    3. B00281I

      for RHD:


      1. Connect the rear seat outer belt assembly LH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  27. INSTALL LOWER QUARTER TRIM PANEL RH


    1. B0027SEC01
      B0069FO Install in this Direction

      Attach the clip and claw to install the lower quarter trim panel RH as shown in the illustration.

    2. B0028C6C01
      *1 Front Door Opening Trim Weatherstrip RH

      Connect the front door opening trim weatherstrip RH in the range shown in the illustration.

    3. B00257X

      for RHD:


      1. Connect the rear seat outer belt assembly RH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  28. INSTALL BACK PANEL TRIM


    1. B0027I7C01
      B0069FO Install in this Direction

      Attach the clip and claw to install the back panel trim as shown in the illustration.

  29. INSTALL REAR SEAT CUSHION ASSEMBLY (for RHD)

    Click here

  30. INSTALL FRONT PILLAR GARNISH LH

    Click here

  31. INSTALL FRONT PILLAR GARNISH RH

    Click here

  32. INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Assist Grip)

    Click here

  33. INSTALL FRONT SEAT ASSEMBLY RH

    Click here

  34. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  35. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  36. CHECK SRS WARNING LIGHT (w/ Airbag System)

    Click here