ROOF HEADLINING(for Single Cab) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 1 ROOF WIRE


    1. w/ Overhead Console:


      1. B0027UGC02
        *a Marking
        B00692L Tape

        Fix the No. 1 roof wire in place with tape as shown in the illustration.

        Tech Tips

        Align the tape with the markings when attaching it.

    2. w/o Overhead Console:


      1. B0026JNC02
        *a Marking
        B00692L Tape

        Fix the No. 1 roof wire in place with tape as shown in the illustration.

        Tech Tips

        Align the tape with the markings when attaching it.

  2. INSTALL NO. 2 ROOF SILENCER PAD


    1. w/ Overhead Console:


      1. B00247UC01
        *a Silencer Marking

        Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.

    2. w/o Overhead Console:


      1. B0027SYC01
        *a Silencer Marking

        Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.

  3. INSTALL NO. 1 ROOF SILENCER PAD


    1. w/ Overhead Console:


      1. B0026YBC01
        *a Silencer Marking

        Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.

    2. w/o Overhead Console:


      1. B0027KCC01
        *a Silencer Marking

        Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.