Click here

ROOF HEADLINING(for Double Cab) REASSEMBLY

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here

PROCEDURE


  1. Click here

    INSTALL NO. 1 ROOF WIRE


    1. w/o Pre-collision System:


      1. B0027IPC02
        *a Marking B00692L Tape

        Fix the No. 1 roof wire in place with tape as shown in the illustration.

        Tip:

        Align the tape with the markings when attaching it.

    2. w/ Pre-collision System:


      1. B0024I8C02
        *A for LHD *B for RHD
        *C for LHD, w/ Camera Heater *D for RHD, w/ Camera Heater
        *a Marking B00692L Tape

        Fix the No. 1 roof wire in place with tape as shown in the illustration.

        Tip:

        Align the tape with the markings when attaching it.

  2. Click here

    INSTALL NO. 3 ROOF SILENCER PAD


    1. B0028CBC01
      *a Silencer Marking

      Align the 2 No. 3 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 3 roof silencer pads using double-sided tape or adhesive as shown in the illustration.

  3. Click here

    INSTALL NO. 2 ROOF SILENCER PAD


    1. B0026Y5C01
      *a Silencer Marking

      Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.

  4. Click here

    INSTALL NO. 1 ROOF SILENCER PAD


    1. B0027C4C01
      *a Silencer Marking

      Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.