Click here

UPPER INSTRUMENT PANEL REASSEMBLY

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here

PROCEDURE


  1. Click here

    INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY (w/ Front Passenger Airbag)

    Click here

  2. Click here

    INSTALL METER MOUNTING BRACKET


    1. B0028FVC01
      *a Screw <D>

      for LH Side:


      1. Install the meter mounting bracket with the screw <D>.

    2. B00268TC01
      *a Screw <D>

      for RH Side:


      1. Install the meter mounting bracket with the screw <D>.

  3. Click here

    INSTALL NO. 5 INSTRUMENT PANEL CUSHION

    Note:

    Installing the part with double-sided tape residue still remaining can cause poor adhesion. Therefore, using a cloth or other material, clean the part until the residue is completely removed (when reusing the upper instrument panel sub-assembly).


    1. B0024ZB

      Remove the peeling paper from a new No. 5 instrument panel cushion and press firmly to install the No. 5 instrument panel cushion in the position shown in the illustration.

  4. Click here

    INSTALL NO. 1 INSTRUMENT PANEL CUSHION

    Note:

    Installing the part with double-sided tape residue still remaining can cause poor adhesion. Therefore, using a cloth or other material, clean the part until the residue is completely removed (when reusing the upper instrument panel sub-assembly).


    1. B00273O

      Remove the peeling paper from a new No. 1 instrument panel cushion and press firmly to install the No. 1 instrument panel cushion in the position shown in the illustration.

  5. Click here

    INSTALL NO. 2 INSTRUMENT PANEL CUSHION

    Note:

    Installing the part with double-sided tape residue still remaining can cause poor adhesion. Therefore, using a cloth or other material, clean the part until the residue is completely removed (when reusing the upper instrument panel sub-assembly).


    1. B00264F

      Remove the peeling paper from a new No. 2 instrument panel cushion and press firmly to install the No. 2 instrument panel cushion in the position shown in the illustration.

  6. Click here

    INSTALL NO. 3 INSTRUMENT PANEL CUSHION

    Note:

    Installing the part with double-sided tape residue still remaining can cause poor adhesion. Therefore, using a cloth or other material, clean the part until the residue is completely removed (when reusing the upper instrument panel sub-assembly).


    1. B002682

      Remove the peeling paper from a new No. 3 instrument panel cushion and press firmly to install the No. 3 instrument panel cushion in the position shown in the illustration.

  7. Click here

    INSTALL NO. 4 INSTRUMENT PANEL CUSHION

    Note:

    Installing the part with double-sided tape residue still remaining can cause poor adhesion. Therefore, using a cloth or other material, clean the part until the residue is completely removed (when reusing the upper instrument panel sub-assembly).


    1. B0026CM

      Remove the peeling paper from a new No. 4 instrument panel cushion and press firmly to install the No. 4 instrument panel cushion in the position shown in the illustration.

  8. Click here

    INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. w/o Front Passenger Airbag:


      1. Connect the connector and attach the clamp to install the No. 2 instrument panel wire.

    2. w/ Front Passenger Airbag:


      1. Connect the airbag connector to the instrument panel passenger without door airbag assembly.

        Note:

        When connecting any airbag connector, take care not to damage the airbag wire harness.

      2. Push in the connector lock to install the airbag connector.

      3. B00248UC01
        *a Airbag Connector *b Connector Lock
        *c Connector - -

        Connect the connector and attach the clamp to install the No. 2 instrument panel wire.

  9. Click here

    INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. B0024P9C02
      *a Screw <D>
      *b Connector

      Install the center instrument panel register assembly with the 4 screws <D>.

    2. Connect the connector and attach the clamp.

  10. Click here

    INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

    Click here

  11. Click here

    INSTALL NO. 2 HEATER TO REGISTER DUCT


    1. w/o Navigation System:


      1. B0024PZ

        Install the No. 2 heater to register duct.

    2. w/ Navigation System:


      1. B0024H6

        Install the No. 2 heater to register duct.

      2. Attach the clamp.

  12. Click here

    INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. B00288SC01
      *a Screw <D>

      Install the No. 2 heater to register duct sub-assembly with the 4 screws <D>.

  13. Click here

    INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY


    1. B002550C01
      *a Screw <D>

      Install the No. 1 heater to register duct sub-assembly with the 4 screws <D>.

  14. Click here

    INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. B0027TXC01
      *a Screw <D>

      Install the defroster nozzle assembly with the 3 screws <D>.