ECO SWITCH INSPECTION

PROCEDURE


  1. INSPECT COMBINATION SWITCH ASSEMBLY (ECO MODE SWITCH)


    1. B00257DC04
      *a

      Component without harness connected

      (Combination Switch Assembly (Eco Mode Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      4(ECU) - 2(E) ECO mode switch ON position Below 10 Ω
      ECO mode switch OFF position 10 kΩ or higher

      If the result is not as specified, replace the combination switch assembly (eco mode switch).