FRONT EVAPORATOR TEMPERATURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL NO. 1 COOLER THERMISTOR (FRONT EVAPORATOR TEMPERATURE SENSOR)

   
   
   1. 

      Install the No. 1 cooler thermistor (front evaporator temperature sensor) as shown in the illustration.

      Note:
      

      • Be sure to insert the No. 1 cooler thermistor (front evaporator temperature sensor) only once because reinserting it into the same position will not allow it to be firmly secured.

      • When reusing the evaporator, insert the No. 1 cooler thermistor (front evaporator temperature sensor) one row next to the one that has been used previously.

      • After inserting the thermistor, do not apply excessive force to the wire.

      Installation Position
      Position Measurement a 45 to 55 mm (1.78 to 2.16 in.) b 61.1 mm (2.41 in.) (9 Fins)

2. Click here

   INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL COOLER EXPANSION VALVE

   Click here

4. Click here

   INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY (for Automatic Air Conditioning System, Manual Air Conditioning System)

   Click here

5. Click here

   INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

   Click here

6. Click here

   INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for Automatic Air Conditioning System)

   Click here

7. Click here

   INSTALL BLOWER ASSEMBLY

   Click here

8. Click here

   INSTALL AIR CONDITIONING UNIT ASSEMBLY

   Click here