Click here

COMPRESSOR(for 5L-E) DISASSEMBLY

Click here
Click here Click here

PROCEDURE


  1. Click here

    REMOVE COOLER BRACKET


    1. A01W8M0

      Remove the screw.

    2. Detach the clamp and remove the cooler bracket.

  2. Click here

    REMOVE MAGNET CLUTCH ASSEMBLY


    1. A01WA7XC01
      *a SST

      Clamp the compressor assembly with magnet clutch in a vise between aluminum plates.

    2. Using SST, hold the magnet clutch hub.

      09985-00270

    3. Remove the bolt, magnet clutch hub and magnet clutch washer(s).

      Tip:

      There is no set number of magnet clutch washers that are used for adjusting clutch clearance.

    4. A01WAOF

      Using a snap ring expander, remove the snap ring and magnet clutch rotor.

      Note:

      Do not damage the seal cover of the bearing when removing the snap ring.

    5. A01W9GQ

      Using a snap ring expander, remove the snap ring and magnet clutch stator.