COMPRESSOR(for 1KD-FTV, 2KD-FTV) INSPECTION

PROCEDURE


  1. INSPECT MAGNET CLUTCH ASSEMBLY


    1. Inspect the magnet clutch assembly.


      1. Apply battery voltage to the clutch and check the operation of the clutch.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 1 (MG+)

        Battery negative (-) → Body ground

        		 Magnet clutch is engaged
        B0027I2C01
        *A w/o Thermostat, for Type A *B w/o Thermostat, for Type B
        *C w/ Thermostat - -
        *a

        Component without harness connected

        (Magnet Clutch Assembly)

        		 - -

        If the result is not as specified, replace the magnet clutch assembly.