BLOWER MOTOR CONTROLLER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  2. REMOVE BLOWER MOTOR CONTROL


    1. B0024KNC01
      B0068HS Screw
      B006964 Connector

      for Automatic Air Conditioning System, w/ Rear Resistor Duct:


      1. Detach the clamp.

      2. Disconnect the 2 connectors.

      3. Remove the 2 screws and blower motor control.

    2. B00258QC01
      B0068HS Screw
      B006964 Connector

      for Automatic Air Conditioning System, w/o Rear Resistor Duct:


      1. Disconnect the connector.

      2. Remove the 2 screws and blower motor control.