COMPRESSOR(for 1GR-FE) INSPECTION

PROCEDURE


  1. INSPECT MAGNET CLUTCH ASSEMBLY


    1. Inspect the magnet clutch assembly.


      1. Apply battery voltage to the clutch and check the operation of the clutch.

        B0028JHC01
        *A w/o Thermostat *B w/ Thermostat
        *a

        Component without harness connected

        (Magnet Clutch Assembly)

        		 - -
        OK
        Measurement Condition Specified Condition

        Battery positive (+) - 1 (MG+)

        Battery negative (-) - Body ground

        		 Magnet clutch is engaged

        If the result is not as specified, replace the magnet clutch assembly.