Click here

REAR SEAT OUTER BELT ASSEMBLY(for Smart Cab) INSTALLATION

Click here
Click here Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

Click here

PROCEDURE


  1. Click here

    INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. Attach the 2 guides and temporarily install the rear No. 1 seat outer belt assembly LH with the bolt.

    2. Tighten the bolt.

      12.5 N*m 127 kgf*cm 9 ft.*lbf
    3. A01SGNB

      Connect the shoulder anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
  2. Click here

    INSTALL SEAT BELT ANCHOR COVER CAP

    Click here

  3. Click here

    INSTALL LOWER QUARTER TRIM PANEL LH

    Click here

  4. Click here

    INSTALL REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH (for Floor Anchor)


    1. B00250V

      Install the bolt and connect the floor anchor of the rear No. 1 seat outer belt assembly LH.

      42 N*m 428 kgf*cm 31 ft.*lbf
  5. Click here

    INSTALL BACK PANEL TRIM

    Click here

  6. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here