REAR SEAT OUTER BELT ASSEMBLY(for Smart Cab) INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY


    1. A01SHYVC01
      *a Unlocked
      *b Locked
      *c 45°

      Before installing the rear No. 1 seat outer belt assembly, check the ELR.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

        If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.