REAR CENTER SEAT OUTER BELT ASSEMBLY(for Double Cab) INSPECTION

PROCEDURE

1. Click here

   INSPECT REAR CENTER SEAT 3 POINT TYPE BELT ASSEMBLY

   
   
   1. 

      *a	Unlock
      *b	Lock
      *c	45°

      Before installing the rear center seat 3 point type belt assembly, check the ELR function.

      Note:

      Do not disassemble the retractor.

      
      

      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

         If the result is not as specified, replace the rear center seat 3 point type belt assembly.