FRONT SEAT INNER BELT ASSEMBLY(for Power Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH


    1. A01L9KIC03
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly LH)

      for LHD vehicles:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Seat belt unfastened Below 1 Ω
      2 - 3 Seat belt fastened 10 MΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly LH.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH


    1. A01L9KIC03
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly LH)

      for RHD vehicles:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Seat belt unfastened Below 1 Ω
      2 - 3 Seat belt fastened 10 MΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly LH.