FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH


    1. Install the front seat belt anchor plate.

    2. A01SJAJC01
      *a Protruding Part

      Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

    3. Attach the wire harness clamp.

    4. A01SHL4C01
      B0069FO Install in this Direction

      Close the cover as shown in the illustration.

    5. A01SK6M

      Attach the wire harness clamp and connector clamp.

    6. A01SJIF

      Install the band in the position shown in the illustration.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    1. Install the front seat belt anchor plate.

    2. A01SIOQC01
      *a Protruding Part

      Install the front seat inner belt assembly RH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

    3. Attach the wire harness clamp.

    4. A01SGILC02
      B0069FO Install in this Direction

      Close the cover as shown in the illustration.

    5. A01SH9G

      Attach the wire harness clamp and connector clamp.

  3. INSTALL FRONT SEAT ASSEMBLY

    Click here