OCCUPANT DETECTION SENSOR REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • B0025TC

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • If the front seat side airbag was deployed, replace the front seat airbag assembly, separate type front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

  • Replace any other damaged parts as necessary.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY RH (for Separate Seat Type)

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY RH (for Bench Seat Type)

    Click here

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Separate Seat Type)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD RH (for Separate Seat Type)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Separate Seat Type)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Separate Seat Type)

    Click here

  7. REMOVE FRONT SEAT BACK FRAME SUB-ASSEMBLY RH (for Separate Seat Type)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  8. REMOVE SEAT CUSHION COVER WITH PAD (for Separate Seat Type)

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Separate Seat Type)


    1. A01SI0O

      Remove the 2 hog rings and disconnect the 2 straps of the separate type front seat cushion cover from the separate type front seat cushion pad.

    2. A01SHPA

      Remove the 18 hog rings and separate type front seat cushion cover.

  10. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Bench Seat Type)

    Click here

  11. REMOVE FRONT SEAT CUSHION SHIELD RH (for Bench Seat Type)

    Click here

  12. REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Bench Seat Type)

    Click here

  13. REMOVE SEATBACK COVER WITH PAD (for Bench Seat Type)

    Click here

  14. REMOVE SEAT CUSHION COVER WITH PAD (for Bench Seat Type)

    Click here

  15. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR) (for Bench Seat Type)


    1. A01SIGN

      Remove the 7 hog rings and separate type front seat cushion pad.