SEAT BELT WARNING LIGHT(for Rear) INSPECTION

PROCEDURE


  1. INSPECT TELLTALE LIGHT ASSEMBLY


    1. A01LBI9C01
      *a

      Component without harness connected

      (Telltale Light Assembly)
      *b Rear Seat LH Indicator
      *c Rear Center Seat Indicator
      *d Rear Seat RH Indicator

      Apply battery voltage to the telltale light assembly connector, and check that the telltale light assembly indicator illuminates.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 10 (IG+)

      Battery negative (-) → Terminal 1(RLID)

      		 Rear seat LH indicator illuminates

      Battery positive (+) → Terminal 10 (IG+)

      Battery negative (-) → Terminal 2(RCID)

      		 Rear center seat indicator illuminates

      Battery positive (+) → Terminal 10 (IG+)

      Battery negative (-) → Terminal 3(RRID)

      		 Rear seat RH indicator illuminates

      If the result is not as specified, replace the telltale light assembly.