SEAT BELT WARNING LIGHT(for Rear) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   PRECAUTION

   CAUTION:
   

   Be sure to read Precaution thoroughly before servicing.

   for Type A:

   Click here

   for Type B:

   Click here

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

   Click here

   Click here

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:
   

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. Click here

   REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

4. Click here

   REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

   Click here

5. Click here

   REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

   Click here

6. Click here

   REMOVE CONTROL KNOB SUB-ASSEMBLY (for Manual Cooler System)

   Click here

7. Click here

   REMOVE AIR INLET DAMPER CONTROL LEVER (for Manual Cooler System)

   Click here

8. Click here

   REMOVE INTEGRATION PANEL SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Manual Cooler System)

   Click here

9. Click here

   DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Cooler System)

   Click here

10. Click here

    DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Cooler System)

    Click here

11. Click here

    REMOVE CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

12. Click here

    REMOVE AIR INLET DAMPER CONTROL LEVER (for Manual Air Conditioning System)

    Click here

13. Click here

    REMOVE INTEGRATION PANEL SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System)

    Click here

14. Click here

    DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

15. Click here

    DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

16. Click here

    DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

17. Click here

    REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

    Click here

18. Click here

    REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

19. Click here

    REMOVE TELLTALE LIGHT ASSEMBLY

    
    
    1. 

       for LHD:

       Detach the 4 claws and remove the telltale light assembly.

    2. 

       for RHD:

       Detach the 4 claws and remove the telltale light assembly.