FRONT SEAT INNER BELT ASSEMBLY(for Bench Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT CENTER SEAT LAP TYPE BELT ASSEMBLY (for 2 Person Bench Seat Type)

    A01LER1

    1. Install the front center seat lap type belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH


    1. A01L8SUC01
      *a Mark
      B006964 Front
      B00692L Protruding Part

      for 2 Person Bench Seat Type:


      1. Align the direction of the anchor plate with the protruding part of the vehicle body as shown in the illustration.

      2. Install the front seat inner belt assembly RH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the body.

    2. A01LEQJC01
      B006964 Front
      B00692L Protruding Part

      except 2 Person Bench Seat Type:


      1. Align the direction of the anchor plate with the protruding part of the vehicle body as shown in the illustration.

      2. Install the front seat inner belt assembly RH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the body.

  3. INSTALL FRONT SEAT ASSEMBLY RH

    Click here