REAR SEAT ASSEMBLY(for Seat Cushion Bench Type) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL REAR SEATBACK HOLDER RH

    Note


    • Perform the following only when replacing the rear seatback holder RH.

    • Do not reuse the rear seatback holder RH after removing it.


    1. A01LB2EC01
      B0069FO Install in this Direction

      Attach the claw to install 2 new rear seatback holder RH.

  2. INSTALL REAR SEAT ASSEMBLY


    1. Place the rear seat assembly in the cabin.

      Note


      • Installing the rear seat assembly from the vehicle must be performed by multiple people.

      • Do not damage the rear seat assembly, body exterior or vehicle interior.

    2. A01LAU2C01
      B0069FO Install in this Direction

      Push in the installation direction shown in the illustration and attach the hook to install the rear seat assembly.

    3. Temporarily install the rear seat assembly with the 5 bolts.

    4. Tighten the 5 bolts in the order shown in the illustration.

      Torque:
      19.5 N*m  { 199 kgf*cm, 14 ft.*lbf }
    5. A01LDQIC02
      B0069FO Install in this Direction

      w/o Center Headrest:

      Pass the 3 inner belt buckles through the elastic strap of the seatback and connect them to the seatback.

    6. A01L90PC01
      B0069FO Install in this Direction

      w/ Center Headrest:

      Pass the 4 inner belt buckles through the elastic strap of the seatback and connect them to the seatback.

    7. A01L99K

      Detach the No. 1 fold seat stopper band assembly from the stay of the rear seat headrest assembly.

    8. Return the rear seat cushion assembly to its original position to lock the seat cushion lock.

    9. A01LCU5C01
      B0069FO Install in this Direction

      w/ Center Headrest:

      Connect the rear seat center outer belt to the buckle.